You may get a list of errors like this:.Next you click “Check” to see what parts of your board are too close together.For this project we adjusted them to 30mil. Then change the size of the traces as big as you think you need. You also may want wider traces you can accomplish this while we are in the DRC, click on the “Sizes' tab.Next we need to change all of the options to 15mil as this setting seems to work well with the tip we are using for our CNC machine so we set this as our clearing width.Trying to get away from chemical etching I just downloaded PCB-Gcode 3.3.2.zip from the Eagle site and loaded it into my ULP folder but what. 5) Setup the CNC machine and mill the PCB isolation. A good one for this is the PCB-GCODE-WIZARD program available at this website for only $18. 4) Use a Gcode editor/plotter/viewer to verify and optimize the Gcode files. What do I need to do in Eagle so PCB-G-Code will b able to generate what it takes to cut my pcb? 3) Run the PCB-GCODE.ULP program (from within Eagle layout ) to generate the Gcode text files needed by the CNC machine. We do this by pressing the DRC button on the side panel.Ĭreate G-Code from an EAGLE File.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |